ClassifyItems() layers ApplyChainGrouping on top of partitioning, which
writes ShowAsChainMember/ChainStep/ChainAfterLabel on every row.
ClearCompletedAsync only needed the completed-section count/rows, so it
got that mutation as an unwanted side effect of counting.
Split the pure overdue/open/completed partition into PartitionItems();
ClassifyItems() now composes it with the chain-grouping mutation for
Regroup's actual render path. ClearCompletedAsync uses PartitionItems
directly. Regroup's behavior is unchanged.
The 4s reconcile tick called Apply(), which did Rows.Clear() + refill on
every tick -- resetting the user's scroll position and selection while
they're mid-read, exactly what the overlay exists to avoid.
Reconcile granularly instead: find the overlap between the previous and
latest snapshot (the ring buffer is append-mostly, evicting from the
front as entries age out of the 30-min window), trim rows for evicted
entries off the tail, and insert new entries at the head. A tick with no
change now leaves Rows untouched. The WarnErrorOnly toggle still goes
through the full Apply() rebuild, unchanged.
Padding on RowsListBox mirrored the ScrollViewer.Padding-excluded-from-
Extent trap fixed elsewhere today, so move the 10,4 inset onto the
VirtualizingStackPanel's Margin instead, matching the other scrollables.
Headless measurement showed Avalonia's Fluent ListBox template actually
forwards Padding onto PART_ItemsPresenter's margin already (content
side), so this particular control was never affected -- both variants
produce an identical Extent and a fully visible last row at max scroll.
Kept the change for consistency and corrected the CLAUDE.md gotcha to
reflect the verified behavior instead of assuming the same trap applied.
The 4s reconcile tick was added to three long-lived surfaces. On two of
them it reloads by rebuilding every row instance, which silently threw
away whatever the user had built up since the overlay opened; on the
third it healed a row's data but left it in the wrong section.
- WorktreesOverview: LoadAsync clears Rows, SelectedCount, ConflictRows
and BatchProgress, so batch-merge ticks, the highlighted row and a
finished batch's outcome badges were wiped every four seconds --
assembling a multi-worktree selection was impossible. Carry that state
across the reload, keyed by task id, and re-point SelectedRow at the
fresh instance (or clear it when the worktree is gone).
- MergeHelperSelection: the remember/restore had no re-entrancy guard, so
a second tick entering between the first one's reload and its restore
snapshotted rows already back at IsTickedByDefault and wrote that
default back, re-ticking what the user had unticked. One tick at a time,
and hold the row instances instead of a value snapshot so a tick landed
during the await survives.
- TasksIsland: the tick deliberately never called Regroup because Phase 2b
owned Rows in parallel. 2b has landed, so a healed task that went Done
stayed in the Open section under a stale count, and a healed depends-on
link never pulled its dependent under the chain head. Regroup when a
patch moved a grouping input, gated on a cheap key so an idle tick stays
free.
The indent column was hardcoded to 24px, so every row reserved the
gutter even with no child/chain relation. Restore Auto sizing with the
width back on the Border, which collapses to 0 while it is invisible.
Move the step badge into column 1 with a negative margin so its desired
width can never widen the Auto column (same on-screen position).
Reuses the existing 24px indent track (now gated on ShowAsChild OR
ShowAsChainMember) instead of a second mechanism, adds a round step-number
badge centered on the rail line, and a dimmed "after X" chip for chain
members whose head isn't in view or that render as a planning child.
Slice 1 of dependency-chain display: TaskRowViewModel gains DependsOnTaskId
plus the extrinsic ShowAsChainMember/ChainStep/ChainAfterLabel contract for
Slice 2's rail/badge rendering. Regroup's ClassifyItems walks each row's
DependsOnTaskId chain per section, pulls dependents directly under their
head regardless of SortOrder, and falls back to a flat row + label when the
head isn't in the same section (mirrors the ParentInView precedent).
Planning children never join a chain group - parent indent wins - and only
ever carry the label.
No AXAML changes; that's Slice 2.
Document task-number allocation in Data layer (TaskEntity.Number,
next_task_number counter, invariants, insert paths).
Update Worker docs to clarify TaskIdResolver wiring (#123 → GUID lookup),
Number in MCP payloads, and correct the 'Two hard conventions' statement
(only the first is test-enforced).
Bump external-mcp.md verified-against commit to 38af549 (Slice 4 merge)
and add new sections on task ID resolution and numbering.
Add Slice 4 visual verification items to open.md (row/detail number display,
worker-log messages).
Verified against:
- src/ClaudeDo.Data/TaskNumberAllocator.cs
- src/ClaudeDo.Data/Repositories/TaskRepository.cs (AddAsync line 20, CreateChildAsync line 276)
- src/ClaudeDo.Worker/External/TaskIdResolver.cs
- src/ClaudeDo.Worker/External/ExternalMcpService.cs (TaskDto/TaskRefDto DTOs)
- tests/ClaudeDo.Worker.Tests/External/ExternalMcpToolSchemaTests.cs (only first convention test-enforced)
Slice 4/5 of task-numbers: TaskRowViewModel.Number renders as a dimmed
"#123" before the row title; DetailsIslandViewModel.TaskIdBadge now
shows "#123" instead of the unusable "#T<guid-prefix>" handle; and the
curated WorkerLog business events in TaskRunner, TaskMergeService, and
TaskResetService prefix their quoted title with "#<Number>".
TaskIdResolver resolves a #123/bare-123 taskId parameter to its GUID
before any lookup, across every External/ MCP tool that takes a task
id, including the batch tools' id arrays (via delegation to the
already-resolving single-entity methods) and update_task's
dependsOnTaskId (empty string still passes through unchanged as the
clear-link sentinel). An unknown number throws a clear error instead
of a silent null. McpToolDocs.TaskNumberHint tells the agent to refer
to tasks as #<number> when reporting to the user, added to the
description of get_task, list_tasks, add_task, update_task_status and
review_task.
Adds Number alongside every task id in External/'s DTOs -- the two
central mappers (ToDto/ToRefDto -> TaskDto/TaskRefDto) plus every
DTO that carries a bare task id and bypasses them (batch results,
queue state, wait-for-change, config, attachments, handoff,
lifecycle, merge-preview-set, worktree list). Input resolution
(#123 as an argument) stays for slice 3.
The task-numbers slice added a UNIQUE index on tasks.number. Ui.Tests seed
TaskEntity rows directly instead of going through TaskRepository, so every row
kept the default Number = 0 and 31 tests failed with
'UNIQUE constraint failed: tasks.number'.
TaskEntity.Number is a global, monotonically increasing, never-reused
integer (displayed as #123), allocated from AppSettingsEntity.NextTaskNumber
via a single UPDATE...RETURNING statement rather than MAX(number)+1, which
would reissue a deleted task's number. Both insert paths (TaskRepository.
AddAsync and CreateChildAsync) route through the new TaskNumberAllocator,
with a bounded retry on a unique-index collision. One migration adds the
columns, backfills existing rows in creation order, and creates the unique
index afterwards. Data-layer only; MCP/UI wiring is later slices.
HandoffRequested now carries nextPhase end to end (IWorkerClient ->
WorkerClient -> MissionControlViewModel -> GetMergeHelperHandoffLaunchSpecAsync),
and the outgoing tile is left open on handoff instead of being closed --
lookups that need the active pane for a task now use LastOrDefault since a
handler task's ConPtySessions can hold more than one pane.
Threads a nextPhase parameter (wait/merge/wait_final/merge_final, validated
by the new MergeHelperPhase) from handoff_list_handler through
HubBroadcaster/WorkerHub into InteractiveLaunchSpecService, which now picks
the next session's system prompt (MergeHelperWait/MergeHelperMerge) and
model (HandlerWaitAlias/HandlerMergeAlias) from it instead of hardcoding the
old two-phase Execute prompt -- this also fixes a build break left by the
prior prompt-split task, which removed PromptKind.MergeHelperExecute without
updating its only caller.
Also sets --model/--effort/--permission-mode explicitly for every list-handler
session (Triage included) via PermissionModeResolver instead of inheriting the
CLI's ambient model and hardcoding "auto", and adds Task to the merge-helper
allowlist so the Merge phase can delegate diff reviews to subagents.
Avalonia 12 leaves ScrollViewer.Padding out of the scroll Extent, so at
maximum offset the content still overhangs the viewport by the padding
height — the last lines were cut off and unreachable even after
ScrollToEnd(). Move the inset onto the content (Margin on the inner
ItemsControl/StackPanel) and leave the ScrollViewer padding-free.
Affects the work console Output/Git/Session tabs, the reusable session
terminal (task + prep log) and the log visualizer.
Adds HandlerTriageAlias/HandlerWaitAlias/HandlerMergeAlias to ModelRegistry and
replaces PromptKind.MergeHelperExecute with MergeHelperWait (phase 3 only) and
MergeHelperMerge (phases 4-5), so the list handler can run as three
cost-scoped sessions instead of two. Triage's Phase 2 now checks/sets a wide
verify command via get_list_config/set_list_config once per run. Merge now
merges before reruns, delegates diff review to a sonnet subagent, rejects
0-file diffs, tracks the merged-but-not-Done verify-gate outcome, and caps
reruns at one per task via handoff_list_handler's new nextPhase parameter.
InteractiveLaunchSpecService.cs still references the removed
PromptKind.MergeHelperExecute and fails to build -- wiring the Worker/UI side
onto the new roles is a follow-up task.
SetListConfig previously could only pass VerifyCommand through unchanged;
only the UI hub could set it. Add an optional verifyCommand parameter with
matching clear/merge/create-vs-delete handling, and split the list result
into ListConfigDto so the task-only SetTaskConfig/GetTaskConfig DTOs stay
untouched. Also corrects Worker/CLAUDE.md's claim that tasks can override
verify_command — it's list-only.
Shorten the review-prompt placeholder and localize it (session.reviewFeedbackPlaceholder,
en+de) instead of a hardcoded string that overran the narrow column. Switch the growing
TextBox's VerticalContentAlignment from Center to Top so multi-line input grows downward
instead of being clipped top/bottom, add an auto scrollbar past MaxHeight, and top-align
the prompt glyph and Resume button to match.
Cards touched with Margin=0. Add margin on the inner task-row border
instead of the ListBoxItem style, so the drag/drop hit-test container
still covers the row and the drop-hint doesn't flicker between items.
A list working_dir stored as "C:\Dev\Tests\StaplerTracking\" broke every consumer
that puts it on a Windows command line: argv rules read \" as an escaped quote, so
the token never closes. "Open in terminal" passed wt.exe a starting directory of
C:\Dev\Tests\StaplerTracking" and it failed with 0x8007010b; the same data had
already corrupted the ConPTY list handler's arg list in August.
Paths.TrimTrailingSeparator is now the single helper (replacing the copies in
InteractiveLaunchSpecService and ClaudeHelpLauncher) and ListRepository applies it
on Add/Update, which covers every writer: UI create, repo import, hub UpdateList,
and MCP CreateList/UpdateList. OpenInTerminal also switches to ArgumentList so its
quoting is correct regardless of what's stored.
AddScopeOverlapFields, AddTaskDependency and AddFailureReason were each
generated off the same parent migration, so none of their Designer
snapshots knows the others' columns. AddTaskDependency calls AddForeignKey,
which on SQLite forces a full `tasks` table rebuild generated from that
migration's own frozen snapshot -- silently recreating the table without
`scope_globs`.
Result: the Worker died at startup with "no such column: t.scope_globs"
(Hosting failed to start), so it never bound the SignalR port and the App
could not connect. Fresh installs were affected too, not just existing DBs.
Add the missing ScopeGlobs property to the stale Designer snapshot so the
rebuild preserves the column. Verified by migrating a fresh temp DB and
diffing pragma_table_info('tasks') against the model snapshot: 39/39
columns.
Note: the test suite cannot catch this class of bug -- every fixture uses
Database.EnsureCreated(), which builds the schema from the model and never
applies the migration chain.
Phase 2b-1 moved the group headers from {loc:Tr} bindings in TasksIslandView
into HeaderRow.Label, resolved once in Regroup(). RefreshLocalizedText only
updated CompletedHeader and the task rows, so after switching the language the
three section headers kept the old one. Re-run Regroup() there.
Not unit-tested: the only seam is the global static Loc.Current, and mutating
it would bleed into test classes running in parallel.
Replace the three ItemsControl sections (Overdue/Open/Completed) with a single
flat Rows collection (HeaderRow | TaskRowViewModel) bound to a ListBox +
VirtualizingStackPanel, so the realized container count stays bounded instead
of growing with the list (measured: ~7-8 realized containers at any scroll
position with 1000 source rows). Group headers become regular row entries,
each section is simply omitted from Rows when empty, and the Completed
section's Clear-completed action moves onto the header row itself.
SectionFor/ReorderAsync/FindNextInSameSection now read a row's section off
the nearest preceding HeaderRow in Rows instead of three separate bound
collections, and ScrollSelectedIntoView goes through ListBox.ScrollIntoView so
it still works for rows outside the realized window. Drag/reorder behavior,
grouping/counts, and the Clear-completed button are unchanged.
Auto-scroll-while-dragging and the cross-section reorder bug are explicitly
out of scope (follow-up tasks).
Two follow-ups to the Phase 3 reconcile tick:
- LogVisualizer and WorktreesOverview only stopped their timer in the Close
command, but ShowLogVisualizerAsync/ShowWorktreesOverviewAsync had no
dlg.Closed fallback (unlike the MergeHelper picker). An Alt+F4 or owner
close left a 4s timer polling the worker / re-running LoadAsync on an
orphaned VM, accumulating one per open. Extracted StopReconcileTick on both
VMs and wired it from Closed.
- The tick scanned Items linearly per id; at the 500-row cap that is ~250k
string comparisons every few seconds. Index the rows once instead.
TasksIslandViewModel now runs a periodic tick that diffs the flat Items
collection against SQLite and patches properties in place (capped at 500
rows, sharing the Phase 1 delta sequence guard so it never overtakes a
fresher broadcast). Never rebuilds rows or triggers Regroup/LoadForList, so
it stays decoupled from the parallel Phase 2b virtualization work. The same
cadence now refreshes the long-lived Worktrees Overview, Log Visualizer, and
Merge Helper selection overlays; short-lived modals are untouched.
Two branches merged into main independently: one added `runVerify` to
PreviewMergeSet ahead of `cancellationToken`, the other added the subset
test that passed the token positionally. Neither conflicted textually, so
the mismatch only surfaced as CS1503 at test-compile time.
mika kuns