MaxTimeoutSeconds was 170s against runs that take tens of minutes, forcing
a dozen full-context wait rounds per long-running batch. Raise it to 900s
and raise MCP_TOOL_TIMEOUT in lockstep (ClaudeProcess + every
InteractiveLaunchSpecService launch spec) to 930000ms so the client
connection actually stays open that long instead of aborting first.
Add get_queue_state (QueueStateMcpTools): configured vs. effective
parallel-slot count (via QueueService.GetSlotCountsAsync, extracted from
the former GetEffectiveMaxParallelAsync), active slots with taskId +
startedAt including the run_task_now override slot, and queued tasks in
pick order -- so a caller can observe queue occupancy instead of inferring
it from maxParallelExecutions.
Adds a read-only get_effective_run_config(taskId) tool that reports the
model/max-turns/effort/permission-mode/agent-path/system-prompt/skills a
task will actually run with, each tagged with its source (task/list/
preset/global), plus max-turns' raw requested value and clamp status.
Extracted the model/max-turns/agent-path resolution out of
TaskRunner.ResolveConfigAsync into EffectiveRunConfigResolver so the run
path and the new reporting tool share one codepath instead of risking
drift, per docs/explore-notes/worker-task-pipeline.md's max-turns trap.
## Der Zweifel
Ein autonomer Agent und eine interaktive Session sollen sich unterschiedlich verhalten. Unklar war, ob beide denselben System-Prompt mitbekommen.
## Vorbefund (2026-08-05, beim Verfeinern erhoben — **selbst nachpruefen, nicht uebernehmen**)
Sie teilen ihn **nicht**. Pro Startweg:
| Startweg | Einstieg | System-Prompt |
|---|---|---|
| Autonomer Run | `ClaudeArgsBuilder.cs:69-73`
ClaudeDo-Task: b259a1c9a73846ce833f0b555fb1de79
The usage monitor polled the undocumented OAuth usage endpoint every 60s and
earned 429s. It now polls every 5 min while any task is Running and every
15 min while idle (usage_poll_interval_active_seconds / _idle_seconds, both
clamped to >= 60; the old single usage_poll_interval_seconds key is gone).
A 429 comes back as UsageRateLimitedException carrying Retry-After and adds
exponential backoff on top, capped at 30 min and never shorter than the normal
cadence; the strike count resets on the first success. The schedule arithmetic
is the pure static UsagePollSchedule.NextDelay.
Since the idle cadence is slow on purpose, WorkerHub.RefreshUsage drives
UsageMonitorService.RefreshNowAsync behind a Refresh now button in the Usage
Monitor modal: an out-of-band poll that pushes the loop's next-due time out so
no double poll follows, with a 10s cooldown so click-spam can't earn a 429.
Staleness now measures against the slower (idle) interval so an idle worker
isn't flagged stale just for not polling.
Runaway sessions were the single biggest cost driver: model_presets was
never persisted (stayed code-only), default_max_turns shipped at 100, and
ResolveMaxTurns had no upper bound, so a task/list override could run
hundreds of turns unchecked.
- TaskRunner.ResolveMaxTurns now clamps the resolved value to
AppSettings.MaxTurnsCeiling (new column, default 80) and logs a warning
with task id / requested / effective value when it clamps.
- default_max_turns default lowered from 100 to 40 (entity, EF config,
and the seeded row via the new AddMaxTurnsCeiling migration).
- AppSettingsRepository.GetAsync backfills model_presets with the
shipping defaults on first read instead of leaving the column null.
- Settings > General's per-model preset table and the task/list agent
editor now show a hint when a set max-turns value exceeds the ceiling.
All three brief tasks and the nine-child Usage Monitor unit are merged and main
verified green. Correct section 5: "exited with code 1 and no result" is a
catch-all, not a CLI crash — max_turns (sonnet presets default to 30 because
app_settings.model_presets is NULL) and the account session limit both surface
through the same message.
Add a dedicated Usage Monitor & Gate section to Worker CLAUDE.md, wire
UsagePillViewModel/UsageMonitorModalViewModel and the new IWorkerClient
usage surface into Ui CLAUDE.md, and record open verification points
for the pill/modal visual pass and the real gate E2E in docs/open.md.
Data CLAUDE.md already covered the new entity columns and migration.
A task that reports a roadblock but finishes successfully (Done/WaitingForReview/
Failed/Cancelled) had no way to answer it short of a full reset-and-rerun, losing
the run's context. Adds a reply textbox + Send button to the existing ROADBLOCK
card, modeled on the AskUser question card, that resumes the session via
ContinueTaskAsync with the user's own text. Gated on LatestRunSessionId (disabled
with a hint when there's nothing to resume); failures surface through the footer
error strip instead of a modal.
Per-list optional VerifyCommand (list_config.verify_command) runs via
VerifyCommandRunner in the list's working dir right after a successful
merge/continue-merge, before the task is allowed to reach Done. A
non-zero exit or timeout leaves the merge in place but keeps the task
out of Done and reports StatusVerifyFailed with an output excerpt
through MergeResultDto/review_task; no command configured behaves
exactly as before. Merges against the same repo are now serialized
per working dir so a running verify can't be interrupted by a second
merge landing mid-build. Adds the field to the List Settings modal
(en/de localized) and covers success/failure/timeout in
TaskMergeServiceTests + VerifyCommandRunnerTests.
"Let Claude handle it" now creates one ClaudeDo task per run to host the
ConPTY session (Idle/IsManual, never queued) instead of an untracked
ad-hoc tile, so the run has a real title, diff, and review outcome.
Since the handler merges its own changes straight into the list's
working dir, the task never gets a WorktreeEntity; its review range
lives as new HandlerBaseCommit/HandlerHeadCommit columns on TaskEntity
instead, reusing the existing commit-range diff machinery and keeping
it out of the worktrees overview entirely.
A full model id like claude-sonnet-4-6 in list_config.model never matched any
ModelPresets row (only bare aliases did), so every run under it landed on the
hardcoded 30-turn/DefaultLevel fallback instead of the sonnet preset row -
this is what killed two autonomous tasks at the 30-turn limit.
ModelRegistry.TryNormalizeAlias (non-throwing: exact match, then substring
match against a full model id) lets ModelPresets.For resolve a full model id
to its alias's preset row. For a model that still doesn't resolve, the
hardcoded 30 is replaced by a caller-supplied fallbackMaxTurns, and TaskRunner
now passes AppSettings.DefaultMaxTurns there - so that setting has a real
effect instead of being dead, matching the direction already noted in
docs/open.md.
Interactive planning sessions launched with --permission-mode plan, which
gates EVERY MCP tool call regardless of --allowedTools (verified: even a
read-only mcp__claudedo__list_task_lists is denied under plan mode). So the
session prompted the user on the first CreateChildTask -- the whole point of
a planning session.
Switch BuildPlanningStartArgs/BuildPlanningResumeArgs to --permission-mode
default, which honours the allowlist. File edits stay blocked via the planning
system prompt + AllowedTools omitting Write/Edit/Bash. Resume also re-passes
--allowedTools, since the CLI does not restore it across --resume.
The earlier 'glob does not match' hypothesis was empirically falsified:
mcp__claudedo__*, the bare server name, and the explicit tool name all allow
the tool with zero permission_denials in default mode.
mika kuns