Three causes behind the stuck indicator:
- OperationStatus.End did not retire the generation, so tick work posted
while the dispatcher was blocked drained afterwards and set
ShowIndicator back to true on a finished operation.
- The startup update check ran in Task.Run; OperationStatus writes its
observable properties on the calling thread, so the final
ShowIndicator=false never reached the binding.
- OperationIndicator overwrote its own DataContext from the Status
property, which re-targeted the call-site binding. It now scopes the
DataContext to an inner panel and collapses itself when Status is
null; every call site switched from DataContext= to Status=.
Also gates the footer connection pill in the command body instead of
CanExecute (a disabled command greyed out the ONLINE chip), and extends
OperationTiming: pid per line, 4 MB rollover, fast successes dropped
(failures always kept), and DetailsIsland.BindAsync now carries the
selection trigger via TasksIslandViewModel.SelectFrom.
Approve, Submit, Reject, and Park each get their own OperationStatus so the
button locks and shows an OperationIndicator for the duration of the call;
Approve additionally scopes a MergeProgressEvent subscription to its own
task id to sharpen the label from "merging" to "verifying" mid-flight.
MergeSectionViewModel's preview refresh gets the same treatment for display
only, since it has no command button to gate.
WeeklyReportModalViewModel.Generate, PrepPanelViewModel.PlanDayAsync und die beiden
Planning-Aktionen (QueuePlanningSubtasksAsync, FinalizePlanningSessionAsync) laufen jetzt
durch je eine OperationStatus + OperationIndicator statt handgebauter Spinner. Die beiden
Planning-Aktionen teilen sich eine Instanz, angezeigt im Tasks-Island-Header, weil sie aus
einem sofort schliessenden Kontextmenue ausgeloest werden und es keine dauerhafte
Pro-Zeilen-Flaeche gibt, an die ein Indikator gehaengt werden koennte.
Padding on RowsListBox mirrored the ScrollViewer.Padding-excluded-from-
Extent trap fixed elsewhere today, so move the 10,4 inset onto the
VirtualizingStackPanel's Margin instead, matching the other scrollables.
Headless measurement showed Avalonia's Fluent ListBox template actually
forwards Padding onto PART_ItemsPresenter's margin already (content
side), so this particular control was never affected -- both variants
produce an identical Extent and a fully visible last row at max scroll.
Kept the change for consistency and corrected the CLAUDE.md gotcha to
reflect the verified behavior instead of assuming the same trap applied.
From the 2026-08-11 unpushed-commit review (Low). Both in `src/ClaudeDo.Ui/Views/Islands/TaskRowView.axaml`. **Visual verification by the user is required — do not claim either is fixed without a screenshot; list both as open visual checks in the result.**
## A) Chain step badge is drawn under the task card
Commit `eb66ae7` moved `Border.chain-step-badge` from column 0 into column 1 with `Margin
ClaudeDo-Task: 9ec7d4ea-272b-4645-8da4-41ff3621f2f0
The indent column was hardcoded to 24px, so every row reserved the
gutter even with no child/chain relation. Restore Auto sizing with the
width back on the Border, which collapses to 0 while it is invisible.
Move the step badge into column 1 with a negative margin so its desired
width can never widen the Auto column (same on-screen position).
Reuses the existing 24px indent track (now gated on ShowAsChild OR
ShowAsChainMember) instead of a second mechanism, adds a round step-number
badge centered on the rail line, and a dimmed "after X" chip for chain
members whose head isn't in view or that render as a planning child.
Slice 4/5 of task-numbers: TaskRowViewModel.Number renders as a dimmed
"#123" before the row title; DetailsIslandViewModel.TaskIdBadge now
shows "#123" instead of the unusable "#T<guid-prefix>" handle; and the
curated WorkerLog business events in TaskRunner, TaskMergeService, and
TaskResetService prefix their quoted title with "#<Number>".
Avalonia 12 leaves ScrollViewer.Padding out of the scroll Extent, so at
maximum offset the content still overhangs the viewport by the padding
height — the last lines were cut off and unreachable even after
ScrollToEnd(). Move the inset onto the content (Margin on the inner
ItemsControl/StackPanel) and leave the ScrollViewer padding-free.
Affects the work console Output/Git/Session tabs, the reusable session
terminal (task + prep log) and the log visualizer.
Shorten the review-prompt placeholder and localize it (session.reviewFeedbackPlaceholder,
en+de) instead of a hardcoded string that overran the narrow column. Switch the growing
TextBox's VerticalContentAlignment from Center to Top so multi-line input grows downward
instead of being clipped top/bottom, add an auto scrollbar past MaxHeight, and top-align
the prompt glyph and Resume button to match.
Cards touched with Margin=0. Add margin on the inner task-row border
instead of the ListBoxItem style, so the drag/drop hit-test container
still covers the row and the drop-hint doesn't flicker between items.
Replace the three ItemsControl sections (Overdue/Open/Completed) with a single
flat Rows collection (HeaderRow | TaskRowViewModel) bound to a ListBox +
VirtualizingStackPanel, so the realized container count stays bounded instead
of growing with the list (measured: ~7-8 realized containers at any scroll
position with 1000 source rows). Group headers become regular row entries,
each section is simply omitted from Rows when empty, and the Completed
section's Clear-completed action moves onto the header row itself.
SectionFor/ReorderAsync/FindNextInSameSection now read a row's section off
the nearest preceding HeaderRow in Rows instead of three separate bound
collections, and ScrollSelectedIntoView goes through ListBox.ScrollIntoView so
it still works for rows outside the realized window. Drag/reorder behavior,
grouping/counts, and the Clear-completed button are unchanged.
Auto-scroll-while-dragging and the cross-section reorder bug are explicitly
out of scope (follow-up tasks).
get_task/batch_get_tasks now return failureReason (max_turns|timeout|error|
cancelled|unknown) plus failureTurnsUsed/failureMaxTurns on a Failed task, so
max_turns (worktree usually fine, continue_task) is distinguishable from a
real error (reset_failed_task) without pulling get_task_log's raw NDJSON.
Classified and stamped onto TaskEntity by TaskRunner.MarkFailed via
TaskStateService.FailAsync; TaskRunEntity also keeps the CLI's raw
terminal_reason/result_subtype/errors for deeper diagnosis. reset_failed_task's
description now warns explicitly that it discards the worktree and points at
continue_task for max_turns. Surfaced on the task card's status-chip tooltip.
Collapse the grabbed row out of layout instead of overlapping neighbors
with scale/opacity/shadow (the ghost window already shows the moving
snapshot). Replace the thin moss drop-hint lines with a dashed
placeholder gap sized like a collapsed row. Suppress the ordinary hover
highlight and transitions on whatever row is currently the drop target
so it doesn't read as "clickable" while dragging.
The diff viewer used ShowDialog at both call sites (task details, worktrees
overview), blocking navigation of the rest of the app while open. Switch both
to Window.Show(owner) and reuse the one open window (swap DataContext,
Activate()) instead of stacking a second one on re-open.
Add an opt-in maximize/restore button + double-click-titlebar toggle to
ModalShell (ShowMaximizeButton, default false so other modals are untouched),
wired on for DiffViewerView only. Reuses the existing Icon.WinMax/WinRestore
geometry and OffScreenMargin inset from MainWindow's own maximize handling.
The review gate (Approve & Merge locked until the diff is opened) already
fires DiffViewed before the dialog/window is shown, so it is unaffected by
the modal-to-non-modal change.
Remove the redundant TaskUpdated broadcast in TaskRunner.ContinueAsync's
queue-claim path, consolidate InteractiveLaunchSpecService's seven
MCP_TOOL_TIMEOUT literals into one constant (fixing the merge-helper handoff
spec's stale 200000ms value), and surface OpenQuickClaudeSession's two
failure cases via ErrorReported/footer instead of a silent no-op, with a
less ambiguous icon.
AgentStripView was superseded by WorkConsole during the task-detail
redesign but never wired into any view and never deleted. Drops the
unused Border.agent-strip / diff-meter styles and the 14 agent.* locale
keys that only it referenced, and marks A4 in the feature-unification
spec as resolved by deletion.
List settings were reachable via three doors (header button, context
menu, double-click). Drop the context menu entry, matching the same
cut already made for the "Let Claude handle it" entry point.
Context-menu "Let Claude handle it" on list rows duplicated the header
button; both routed to the same ListsIslandViewModel command via the
shell, so only the context menu entry (and its now-unused locale key)
is removed. The header button also shared Icon.Broom with Clear Day —
gave it Icon.AgentSuggested instead.
## Ziel
Ein kleines Icon in der Kopfleiste der Tasks-Insel, das fuer die gerade ausgewaehlte Liste **sofort** eine interaktive ConPTY-Claude-Session im Arbeitsverzeichnis dieser Liste oeffnet — ohne Task, ohne Dialog, ohne Ordnerauswahl.
## Ausgangslage (verifiziert 2026-08-05)
Der komplette Unterbau existiert schon; das ist im Kern Verdrahtung:
- `MissionControlViewModel.OpenAdHocConPtySessio
ClaudeDo-Task: 5d8e6246af9444afa500fbb4546873e7
task_runs.tokens_in only ever held the API's uncached "input_tokens" field
(off by a factor of ~400,000 on a resumed session), and tokens_out summed
only the last result event instead of the whole session. TaskRunner now
reads each run's cache-read/cache-write/input/output totals from the
session transcript via a new ITranscriptUsageReader.ReadSessionTotalsAsync,
storing the delta against prior runs on the same session so a --resume
doesn't double-count. New task_runs.cache_read_tokens/cache_write_tokens
columns; the Session tab now shows the raw total (what actually counts
against the 5h/7d usage limit) with a breakdown tooltip.
A task that reports a roadblock but finishes successfully (Done/WaitingForReview/
Failed/Cancelled) had no way to answer it short of a full reset-and-rerun, losing
the run's context. Adds a reply textbox + Send button to the existing ROADBLOCK
card, modeled on the AskUser question card, that resumes the session via
ContinueTaskAsync with the user's own text. Gated on LatestRunSessionId (disabled
with a hint when there's nothing to resume); failures surface through the footer
error strip instead of a modal.
Two context-menu entries opened a Claude session for the same task via different
mechanisms (embedded ConPTY vs. an external wt terminal). Drop the external-terminal
path entirely, including its worker hub method, launcher plumbing, and localization
keys, since the embedded ConPTY session already covers every case it did.
Auto-seeding of monitor tiles was disabled in 724814f; Mission Control now
only shows ConPTY panes. Removes Monitors/EnsureMonitor/SeedActive, the
detach/re-dock machinery, MonitorPaneView and the detached monitor window,
plus their tests and orphaned localization keys.
TaskMonitorViewModel itself stays: DetailsIslandViewModel still uses it as
the backing state for the task Log/AgentState/AskUser-question UI, so only
its Mission-Control-only members (Title/DisplayTitle, detach, cancel command,
IMissionControlPane) were stripped. IMissionControlPane/Panes were kept
(now a 1:1 mirror of ConPtySessions) rather than dissolved, to avoid
churning the still-live ConPTY pane tests and AXAML for a single-implementer
interface.
Visual verification still open: Mission Control with several open ConPTY
tiles, and the Focus/Overview toggle.
Dragging a task row onto a user list in the Lists island now reassigns it
to that list. The task drag holds the pointer capture, so the release is
resolved geometrically (new case between the Mission Control and reorder
cases) instead of going through the Lists island's own DragDrop path,
which never sees a DragEventArgs during a task drag.
TaskRepository.MoveToListAsync reassigns the task plus every descendant
(a child must never sit in a different list than its parent) and appends
the task at the end of the target list. Guards: running tasks and tasks
holding an Active/Kept worktree are rejected to the footer error strip;
a move that changes repo asks for confirmation naming both repos.
The source repo is read from the task's own list rather than the island's
current list, which is a smart/virtual list with no working dir of its own
whenever one of those is shown.
## Problem
Im Task-Kontextmenü gibt es bereits ein Untermenü "Markieren als …" (`tasks.ctxMarkAs`) mit
"Erledigt" und "Abgebrochen". Die beiden Manuell-Einträge hängen dagegen ganz unten flach im
Hauptmenü — inkonsistent, obwohl sie semantisch dasselbe "markieren als"-Verb sind.
## Ist-Zustand
`src/ClaudeDo.Ui/Views/Islands/TaskRowView.axaml`:
- Zeile ~47-50: `<MenuItem Header="{loc:Tr tasks.ctxM
ClaudeDo-Task: c0630785eb8e47c8bf1da4108028a3c4
Reminders written down as todos had no home: every task looked like Claude work.
A manual task now shows a MANUAL badge and hides send-to-queue, refine and the
planning session; the queue picker, daily prep and the list handler all skip it,
with a TaskStateService guard so the MCP surface and hub cannot start one either.
Opening a hand-driven ConPTY session stays available on purpose.
A list can be marked manual in its settings, which makes tasks created there
(UI and MCP add_task) start out manual. Toggle per task from its context menu.
A task driven by hand in Mission Control is Idle with an Active worktree, so its
lifecycle chip read "Parked" — indistinguishable from a task genuinely set aside.
The shell now mirrors Mission Control's open panes onto the rows, which show an
accent "Interactive" chip instead; tapping it surfaces Mission Control and
focuses that pane (the open command already dedupes by task id).
Both actions previously gave no feedback: opening a ConPTY session only created
the tile after the launch-spec roundtrip (which may build a worktree), and the
refine button just disappeared while the run was in flight.
Add a shared Ellipse.spinner style, and let ConPtyPaneViewModel resolve its own
launch spec so the tile shows up immediately with a starting overlay. A failed
launch now keeps the tile with its inline error banner instead of never
appearing — Start() is separated from the ctor so the host can subscribe to
ErrorReported before the launch begins.
An embedded ConPTY session leaves its worktree changed but never touches
task status, so hand-driven work had no path into the review/merge flow.
Add SubmitTaskForReview: commit the worktree (same auto-commit as a headless
run), then transition Idle/Failed -> WaitingForReview via the new
TaskStateService.SubmitInteractiveForReviewAsync. Approve then merges it.
Surfaces: a 'Submit for review' button in the detail work console (shown for
an Idle/Failed task with a worktree) and on the ConPTY Command Center pane
header (task-based panes; closes the pane on success). Tests cover the new
transition (Idle/Failed accepted, Running/Queued/Done/Review rejected).
Approve & Merge is disabled until the pending changes have been inspected:
DetailsIslandViewModel tracks ReviewDiffViewed (reset on task switch and on
every state change), MergeSectionViewModel raises DiffViewed when a diff or
combined diff is opened and exposes HasReviewableDiff, and a hint sits next
to the button. A review with nothing to inspect (sandbox run, no worktree)
approves straight through.
ClaudeDo-Task: f9809a93
Planning start/resume opened an external Windows Terminal (wt) window.
Route them through the embedded ConPTY Command Center pane instead, matching
the existing interactive-session UX (no external window).
- Extract bare planning arg builders (BuildPlanningStartArgs/ResumeArgs) from
WindowsTerminalLauncher; the wt path still uses them (kept, not removed).
- InteractiveLaunchSpecService.BuildPlanningStart/Resume map a planning
context into a LaunchSpec (planning args + env: MAX_THINKING_TOKENS,
CLAUDEDO_PLANNING_TOKEN). Hub GetPlanningStart/ResumeLaunchSpec run
StartAsync/ResumeAsync then return the spec.
- UI: OpenPlanningSession + the resume branch raise OpenPlanningConPtyRequested;
the shell opens Mission Control and hosts a planning ConPTY pane.
Env is process-global by design (sequential human-paced sessions). wt planning
code retained. Tests added for the arg/env mapping.
The inline answer banner for a running task's AskUser question only existed
in Mission Control. Surface the same banner in the detail pane, bound to the
detail island's existing TaskMonitorViewModel (shared state — no new state,
no duplication) so a question can be answered without opening Mission
Control. Mirrors MC: live TaskQuestionAsked events for the selected task.
A planning parent stays Status=Idle while its session is Active (or
Finalized-but-not-queued), so the lifecycle chip read "Idle"/"Parked"
next to the PLANNING/PLANNED badge. Hide the chip in that case; the badge
already conveys the state.
Opening the dropped IStorageFile stream ran outside the try, so a
first-drop failure escaped the async-void handler as an unobserved fault
(generic "An error occurred"). Wrap the stream-open loop and surface the
exception type via DropStatus; include the exception type in the generic
add-file failure too, so the intermittent case is analyzable.
Icon.Plus was stroke-only geometry, invisible when used in a PathIcon
(fills). Author it as a filled cross, fixing every PathIcon use at once
(New-session, add-list, add-task). Replace the header bar's raw gear
TextBlock with the shared Icon.Settings PathIcon for consistency.
mika kuns