TaskEntity.Number is a global, monotonically increasing, never-reused
integer (displayed as #123), allocated from AppSettingsEntity.NextTaskNumber
via a single UPDATE...RETURNING statement rather than MAX(number)+1, which
would reissue a deleted task's number. Both insert paths (TaskRepository.
AddAsync and CreateChildAsync) route through the new TaskNumberAllocator,
with a bounded retry on a unique-index collision. One migration adds the
columns, backfills existing rows in creation order, and creates the unique
index afterwards. Data-layer only; MCP/UI wiring is later slices.
Adds HandlerTriageAlias/HandlerWaitAlias/HandlerMergeAlias to ModelRegistry and
replaces PromptKind.MergeHelperExecute with MergeHelperWait (phase 3 only) and
MergeHelperMerge (phases 4-5), so the list handler can run as three
cost-scoped sessions instead of two. Triage's Phase 2 now checks/sets a wide
verify command via get_list_config/set_list_config once per run. Merge now
merges before reruns, delegates diff review to a sonnet subagent, rejects
0-file diffs, tracks the merged-but-not-Done verify-gate outcome, and caps
reruns at one per task via handoff_list_handler's new nextPhase parameter.
InteractiveLaunchSpecService.cs still references the removed
PromptKind.MergeHelperExecute and fails to build -- wiring the Worker/UI side
onto the new roles is a follow-up task.
get_task/batch_get_tasks now return failureReason (max_turns|timeout|error|
cancelled|unknown) plus failureTurnsUsed/failureMaxTurns on a Failed task, so
max_turns (worktree usually fine, continue_task) is distinguishable from a
real error (reset_failed_task) without pulling get_task_log's raw NDJSON.
Classified and stamped onto TaskEntity by TaskRunner.MarkFailed via
TaskStateService.FailAsync; TaskRunEntity also keeps the CLI's raw
terminal_reason/result_subtype/errors for deeper diagnosis. reset_failed_task's
description now warns explicitly that it discards the worktree and points at
continue_task for max_turns. Surfaced on the task card's status-chip tooltip.
Adds a user/MCP-declared task dependency (DependsOnTaskId) distinct from the
planning chain's internal BlockedByTaskId: add_task/update_task can set it,
the queue picker skips a Queued task until the dependency reaches Done, a
Failed/Cancelled dependency leaves the dependent blocked instead of starving
silently, and setting a link rejects self-reference/unknown-id/cycles.
get_task/list_tasks/batch_get_tasks now report blocked/blockedReason, and
wait_for_task_change reports "Blocked" immediately instead of running out its
timeout on a task the picker will never claim.
preview_merge/preview_merge_set gain staleFiles: files a branch touches that
the target branch also changed since the branch's fork point, a more honest
staleness signal than `behind` alone.
## Befund (Batch-Lauf 2026-08-06, Liste "Bandel.Hub")
maxParallelExecutions = 5, 23 Geschwister-Tasks auf demselben Plugin. Die Parallelitaet hat die
Ausfuehrung verkuerzt, aber die Konfliktlast erhoeht: eine CSS-Datei wurde von 10 Tasks
angefasst, drei Razor-Dateien von je 6. Der Engpass des Gesamtdurchlaufs war nicht die
Ausfuehrung, sondern Review und Merge — die sind zwingend seriell. Netto wa
ClaudeDo-Task: 89f989e0-4fcf-43f5-a802-11d63df7a6d1
Generates the claude session id up front (--session-id <guid>) for a fresh interactive task
session and persists it to TaskEntity.InteractiveSessionId before launch, so an abort at any
point still leaves a resumable id. BuildForTaskAsync now resumes this task's own last
interactive session in preference to the latest autonomous run's session, but never across a
freshly (re)created worktree.
## Kontext: Limits sind Fenster, nicht Summen
Die Runs laufen ueber das Claude-Abo. Limits greifen pro 5h-Fenster und pro 7 Tage. Nicht die Wochensumme tut weh, sondern dass ein Agent-Burst ein Fenster leerraeumt, in dem Mika selbst interaktiv arbeiten will.
## Messgrundlage (alle Transcripts unter ~/.claude/projects)
Agent-Runs sind ueber die ganze Historie nur **18,4 %** des Account-Verbrauch
ClaudeDo-Task: 87105f5e-c4f4-4af4-ae60-89cd2e153e3c
task_runs.tokens_in only ever held the API's uncached "input_tokens" field
(off by a factor of ~400,000 on a resumed session), and tokens_out summed
only the last result event instead of the whole session. TaskRunner now
reads each run's cache-read/cache-write/input/output totals from the
session transcript via a new ITranscriptUsageReader.ReadSessionTotalsAsync,
storing the delta against prior runs on the same session so a --resume
doesn't double-count. New task_runs.cache_read_tokens/cache_write_tokens
columns; the Session tab now shows the raw total (what actually counts
against the 5h/7d usage limit) with a breakdown tooltip.
Runaway sessions were the single biggest cost driver: model_presets was
never persisted (stayed code-only), default_max_turns shipped at 100, and
ResolveMaxTurns had no upper bound, so a task/list override could run
hundreds of turns unchecked.
- TaskRunner.ResolveMaxTurns now clamps the resolved value to
AppSettings.MaxTurnsCeiling (new column, default 80) and logs a warning
with task id / requested / effective value when it clamps.
- default_max_turns default lowered from 100 to 40 (entity, EF config,
and the seeded row via the new AddMaxTurnsCeiling migration).
- AppSettingsRepository.GetAsync backfills model_presets with the
shipping defaults on first read instead of leaving the column null.
- Settings > General's per-model preset table and the task/list agent
editor now show a hint when a set max-turns value exceeds the ceiling.
Persists the merge commit SHA on WorktreeEntity for every successful
single-task and unit merge, and adds a TaskMergeService.RevertMergeAsync
+ revert_merge MCP tool that undoes a merged task's merge via
`git revert -m 1` (never reset/rewrite, since the target checkout is
shared). Rejects cleanly when there's no recorded SHA, the repo is
mid-merge/mid-revert, or the target has foreign uncommitted changes;
a conflicting revert aborts immediately. Also exposes the new
mergeCommit field via get_task_worktree.
Per-list optional VerifyCommand (list_config.verify_command) runs via
VerifyCommandRunner in the list's working dir right after a successful
merge/continue-merge, before the task is allowed to reach Done. A
non-zero exit or timeout leaves the merge in place but keeps the task
out of Done and reports StatusVerifyFailed with an output excerpt
through MergeResultDto/review_task; no command configured behaves
exactly as before. Merges against the same repo are now serialized
per working dir so a running verify can't be interrupted by a second
merge landing mid-build. Adds the field to the List Settings modal
(en/de localized) and covers success/failure/timeout in
TaskMergeServiceTests + VerifyCommandRunnerTests.
Adds AppSettings.UsageGateFiveHourPct/UsageGateSevenDayPct (defaults
80/90, clamped 0..100 in UpdateAsync) and a nullable TaskRunEntity.Model
column, laying the data foundation for the usage monitor. No worker/UI
changes.
"Let Claude handle it" now creates one ClaudeDo task per run to host the
ConPTY session (Idle/IsManual, never queued) instead of an untracked
ad-hoc tile, so the run has a real title, diff, and review outcome.
Since the handler merges its own changes straight into the list's
working dir, the task never gets a WorktreeEntity; its review range
lives as new HandlerBaseCommit/HandlerHeadCommit columns on TaskEntity
instead, reusing the existing commit-range diff machinery and keeping
it out of the worktrees overview entirely.
A full model id like claude-sonnet-4-6 in list_config.model never matched any
ModelPresets row (only bare aliases did), so every run under it landed on the
hardcoded 30-turn/DefaultLevel fallback instead of the sonnet preset row -
this is what killed two autonomous tasks at the 30-turn limit.
ModelRegistry.TryNormalizeAlias (non-throwing: exact match, then substring
match against a full model id) lets ModelPresets.For resolve a full model id
to its alias's preset row. For a model that still doesn't resolve, the
hardcoded 30 is replaced by a caller-supplied fallbackMaxTurns, and TaskRunner
now passes AppSettings.DefaultMaxTurns there - so that setting has a real
effect instead of being dead, matching the direction already noted in
docs/open.md.
ClaudeDo never passed --effort, so every session inherited whatever effortLevel
the user's Claude Code config happened to carry. Settings -> General now holds one
row per model alias (haiku medium/20, sonnet high/30, opus high/40, fable high/25)
supplying the global effort and turn defaults; list- and task-level max-turns
overrides still win, and the agent editor's inherited badge follows the model.
--effort is applied to autonomous runs and to every ConPTY spec (task session,
planning start/resume, ad-hoc, list handler). The model itself is deliberately not
forced on interactive sessions. The single global 'Max turns' field is replaced by
the table, and 'fable' joins ModelRegistry.Aliases.
The migration also adds the is_manual columns used by the next commit.
TaskAttachmentEntity (+config, cascade FK), TaskAttachmentRepository, and an
AttachmentStore that writes files under ~/.todo-app/attachments/<taskId>/ with
a path-traversal guard and a 5 MB cap. TaskPromptComposer gains an optional
read-only 'Reference files' section. Migration AddTaskAttachments.
AddTask, planning CreateChildTask, and SuggestImprovement now accept an
optional alias-validated model (haiku/sonnet/opus; blank = inherit) so the
model is chosen at creation time instead of a follow-up set_task_config call.
The planning, system, and improvement prompts instruct Claude to pick the
cheapest capable model (haiku < sonnet < opus).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a "Max parallel executions" setting to the General settings tab so
the queue can run more than one task concurrently. QueueService now
tracks multiple active slots and reads the limit from app settings each
cycle, so changes take effect without restarting the worker.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Drag-to-reorder user lists in the sidebar, persisted via a new
list sort_order column (AddListSortOrder migration, backfilled by
creation time) and ListRepository.ReorderAsync
- "Open in Explorer" / "Open in Terminal" context-menu actions on lists
- "Clear all completed" button on the Tasks island
- Inline-edit subtask titles (empty text deletes the step) and
click-to-copy task ID in the Details island
- Make modal and planning windows resizable (BorderOnly decorations
with min sizes) instead of fixed-size borderless
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Replaces six scattered "chore" literals across TaskEntity, ListEntity,
WorkerHub, ListsIslandViewModel, ListNavItemViewModel and the inline
commit type list in ListSettingsModalViewModel.
Also fixes WorkerHub.UpdateAppSettings falling back to "bypassPermissions"
when AppSettingsEntity and the runtime default are "auto". The fallback
now matches the entity default.
Replaces three scattered model lists (ListSettingsModalViewModel,
DetailsIslandViewModel, GeneralSettingsTabViewModel) and the hardcoded
planning model with a single source. Planning launcher now uses the
opus alias instead of pinning claude-opus-4-7.
Drops TagEntity, TagRepository, and tag wiring across data layer, worker,
and UI. Adds RemoveTags migration to clean up schema.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Slice 6 of the worker state and queue consolidation refactor.
* Drop Manual, Planning, Planned, Draft, Waiting from the TaskStatus enum
and from the EF value converter; only the lifecycle values remain
(Idle, Queued, Running, Done, Failed, Cancelled).
* Add migration RetireLegacyTaskStatus that rewrites existing rows:
manual/draft -> idle, planning -> idle+planning_phase=active,
planned -> idle+planning_phase=finalized, waiting -> queued+blocked_by
derived from sort_order via a CTE with LAG().
* Reroute every call site that compared/set legacy values to the new
three-field model (Status + PlanningPhase + BlockedByTaskId), including
the planning repo helpers, MCP services, the planning chain coordinator,
and the UI view-models. TaskRowViewModel now exposes PlanningPhase to
drive the planning badge.
* Refresh Worker/CLAUDE.md and Data/CLAUDE.md, the docs/plan.md status
section, and the planning verification notes in docs/open.md.
Slice 1 of the worker-state-and-queue-consolidation refactor — additive only,
no caller changes. Introduces the new orthogonal status model:
- TaskStatus gains canonical Idle and Cancelled values; legacy values
(Manual, Planning, Planned, Draft, Waiting) stay around until slice 6.
- New PlanningPhase enum (None/Active/Finalized) for parent tasks.
- New BlockedByTaskId FK on TaskEntity for sequential chain ordering;
ON DELETE SET NULL so orphaned children become pickable.
- EF migration adds planning_phase and blocked_by_task_id columns plus
the idx_tasks_blocked_by index. Also picks up an unrelated drift in
app_settings.default_permission_mode that had been changed in code
(commit 14cc9fb) without a migration.
Replaces "bypassPermissions" with "auto" as the default for new installs
and adds "auto" as the first option in the settings dropdown. Existing
rows keep their stored value; ClaudeArgsBuilder still maps the legacy
"bypassPermissions" -> "auto" at dispatch time.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- New TaskStatus.Waiting for sequential subtask chains.
- New TaskEntity.CreatedBy column with migration AddTaskCreatedBy.
- TaskRepository.GetByCreatorAsync for filtering by creator.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
mika kuns