A full model id like claude-sonnet-4-6 in list_config.model never matched any
ModelPresets row (only bare aliases did), so every run under it landed on the
hardcoded 30-turn/DefaultLevel fallback instead of the sonnet preset row -
this is what killed two autonomous tasks at the 30-turn limit.
ModelRegistry.TryNormalizeAlias (non-throwing: exact match, then substring
match against a full model id) lets ModelPresets.For resolve a full model id
to its alias's preset row. For a model that still doesn't resolve, the
hardcoded 30 is replaced by a caller-supplied fallbackMaxTurns, and TaskRunner
now passes AppSettings.DefaultMaxTurns there - so that setting has a real
effect instead of being dead, matching the direction already noted in
docs/open.md.
## Problem
Die "Let Claude handle it"-Session (List-Handler) startet mit `--permission-mode default` und fragt
dadurch bei jedem Tool-Aufruf nach Bestätigung. Sie soll autonom durchlaufen können — der User
überwacht die ConPTY-Kachel, statt jede Aktion einzeln freizugeben.
## Ist-Zustand
`src/ClaudeDo.Worker/Runner/InteractiveLaunchSpecService.cs`, `BuildForMergeHelperAsync`
(Zeile ~183-249). Die
ClaudeDo-Task: 50a6027eba294dde8b18e4082dfc1e9b
ClaudeDo never passed --effort, so every session inherited whatever effortLevel
the user's Claude Code config happened to carry. Settings -> General now holds one
row per model alias (haiku medium/20, sonnet high/30, opus high/40, fable high/25)
supplying the global effort and turn defaults; list- and task-level max-turns
overrides still win, and the agent editor's inherited badge follows the model.
--effort is applied to autonomous runs and to every ConPTY spec (task session,
planning start/resume, ad-hoc, list handler). The model itself is deliberately not
forced on interactive sessions. The single global 'Max turns' field is replaced by
the table, and 'fable' joins ModelRegistry.Aliases.
The migration also adds the is_manual columns used by the next commit.
Interactive planning sessions launched with --permission-mode plan, which
gates EVERY MCP tool call regardless of --allowedTools (verified: even a
read-only mcp__claudedo__list_task_lists is denied under plan mode). So the
session prompted the user on the first CreateChildTask -- the whole point of
a planning session.
Switch BuildPlanningStartArgs/BuildPlanningResumeArgs to --permission-mode
default, which honours the allowlist. File edits stay blocked via the planning
system prompt + AllowedTools omitting Write/Edit/Bash. Resume also re-passes
--allowedTools, since the CLI does not restore it across --resume.
The earlier 'glob does not match' hypothesis was empirically falsified:
mcp__claudedo__*, the bare server name, and the explicit tool name all allow
the tool with zero permission_denials in default mode.
Planning start/resume opened an external Windows Terminal (wt) window.
Route them through the embedded ConPTY Command Center pane instead, matching
the existing interactive-session UX (no external window).
- Extract bare planning arg builders (BuildPlanningStartArgs/ResumeArgs) from
WindowsTerminalLauncher; the wt path still uses them (kept, not removed).
- InteractiveLaunchSpecService.BuildPlanningStart/Resume map a planning
context into a LaunchSpec (planning args + env: MAX_THINKING_TOKENS,
CLAUDEDO_PLANNING_TOKEN). Hub GetPlanningStart/ResumeLaunchSpec run
StartAsync/ResumeAsync then return the spec.
- UI: OpenPlanningSession + the resume branch raise OpenPlanningConPtyRequested;
the shell opens Mission Control and hosts a planning ConPTY pane.
Env is process-global by design (sequential human-paced sessions). wt planning
code retained. Tests added for the arg/env mapping.
HasChangesAsync counted untracked files, so a stray file in the shared
target working dir (e.g. left by a concurrent session) blocked merge
preflights even though nothing tracked changed. Add an includeUntracked
overload defaulting to true, and pass includeUntracked: false only from
the two target-working-tree merge preflights (TaskMergeService.MergeAsync,
PlanningMergeOrchestrator.StartAsync). Auto-commit and the worktree
cleanup data-loss guard keep counting untracked files, since those
callers need to know about them.
The embedded ConPTY terminal replaced the in-app streaming interactive session, so
delete the dead stack: StreamingClaudeSession, InteractiveSessionService,
ProcessClaudeStreamTransport, IClaudeStreamTransport, ILiveSession, LiveSessionRegistry,
IdleSessionReaper (+ WorkerConfig.InteractiveIdleTimeoutMinutes), the WorkerHub
interactive methods + HubBroadcaster events, IWorkerClient interactive members, the
TaskMonitorViewModel composer + SessionTerminalView composer markup, and the old
'Run interactively' entry. AskUser/PendingQuestionRegistry, the autonomous path,
planning, ResumeTaskInTerminal, and all ConPTY code are kept. Localization pruned.
A fresh (non-resume) task-based ConPTY session now opens claude on the task's
prompt (title + description) as the positional argument, so the session starts on
the task instead of an empty prompt. Resume sessions and ad-hoc sessions are
unchanged.
BuildForTaskAsync now creates a worktree on demand (via WorktreeManager.CreateAsync,
the same path TaskRunner uses) when a task has a configured working dir but no
Active/Kept worktree, returning a fresh-start spec -- so never-run tasks can be
opened interactively. Adds BuildForDirectoryAsync + GetAdHocLaunchSpec hub/client
for ad-hoc sessions in an arbitrary directory (no task, no worktree, no skill seeding).
Adds InteractiveLaunchSpecService + GetInteractiveLaunchSpec hub method that
prepares a task worktree (session-skills seeding, run env) and returns a
LaunchSpec {cwd,exe,args,env} for a UI-hosted ConPTY terminal. Reuses
ISessionSkillSeeder, TaskRunner.UnionSkillNames, and WindowsTerminalLauncher
resume-arg/resolve logic. Guards mirror ResumeTaskInTerminal; a never-run task
yields a fresh-start spec instead of an error.
Interactive/streaming sessions are persistent claude.exe processes that
wait on stdin and never exit on their own. The only teardown was an
explicit StopInteractiveSession from the UI — there is no client-disconnect
or shutdown sweep — so an abandoned chat (UI closed, navigated away,
crashed) kept its claude.exe (+ conhost) alive for the worker's whole
lifetime. Under a long-running autostart worker these accumulate to dozens
of orphaned child processes.
LiveSessionRegistry now tracks per-session activity (Touch on every output
line and user action) and exposes ReapIdleAsync, which stops sessions idle
past a timeout while skipping any with a turn in flight. IdleSessionReaper
(BackgroundService) sweeps every 5 min; idle timeout defaults to 30 min,
configurable via interactive_idle_timeout_minutes (0 disables).
StreamingClaudeSession.RemoveQueuedAsync drops the first occurrence of a queued
message from _pending and re-broadcasts the updated queue. Wired through
InteractiveSessionService + WorkerHub.RemoveQueuedInteractiveMessage +
IWorkerClient.RemoveQueuedInteractiveMessageAsync. Removal by text (first match)
is robust to a turn flushing mid-click. Fakes + ILiveSession impls updated.
StreamingClaudeSession raises onQueueChanged (pending snapshot) and onUserMessageSent
(on delivery, incl. the seeded first prompt); InteractiveSessionService forwards these
as InteractiveQueueChanged/InteractiveMessageSent broadcasts. Lets the UI show queued
messages above the input and move a message into the transcript only when actually
delivered to Claude. Client events + fakes updated.
StreamingClaudeSession now buffers a mid-turn user message in a FIFO queue and
flushes one when the turn's result arrives (no implicit interrupt). InterruptAsync
only writes the control_request (no-op when idle); the resulting turn-end then
flushes any queued message. New InteractiveSessionService.InterruptAsync +
WorkerHub.InterruptInteractiveSession + IWorkerClient.InterruptInteractiveSessionAsync.
StreamingClaudeSession drives claude --input-format stream-json over a kept-
open stdin: sends user messages, interrupts the in-flight turn via the verified
control_request protocol, and tracks turn state from result events (treating an
interrupt-aborted error_during_execution result as turn-ended). IClaudeStreamTransport
abstracts the process I/O so it is unit-tested with a fake (no real claude).
LiveSessionRegistry maps taskId -> live session for the hub to route into.
Backs the upcoming in-app interactive sessions; autonomous task execution untouched.
A running task can call mcp__claudedo_run__AskUser(question) to block (up to 3
min) on a human answer. PendingQuestionRegistry holds the pending question +
TaskCompletionSource; the tool broadcasts TaskQuestionAsked, awaits the answer
(WorkerHub.AnswerTaskQuestion resolves it), and returns it as the tool result —
or a 'proceed on your judgment' fallback on timeout. The run stays Running
throughout (no status/schema change). ClaudeProcess raises MCP_TOOL_TIMEOUT so
the 60s HTTP-MCP cap doesn't kill the wait; the run MCP is now wired for every
task, not just standalone ones. System prompt updated to reconcile 'unattended'.
TaskRunner appends attached files (absolute paths) to the run prompt as the
read-only Reference files section. Task and list deletes now remove the
on-disk attachment dir eagerly, and a startup AttachmentOrphanRecovery sweep
drops any attachments/<taskId>/ whose task no longer exists (covers list
cascade and planning-discard paths).
The picker claims Queued->Running atomically before dispatch; the new
StartRunningAsync guard then rejected every queue-dispatched run. Add
alreadyClaimed to RunAsync/ContinueAsync (queue passes true, override
slot keeps the guard) and align the routing tests.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Befund (bestätigt): src/ClaudeDo.Worker/Runner/TaskRunner.cs:101 (RunAsync) und :211 (ContinueAsync) ignorieren das TransitionResult von _state.StartRunningAsync. Race-Szenario: Der QueuePicker claimt Queued→Running atomar; ruft der Override-Pfad (RunNow) kurz danach RunAsync für denselben Task auf, schlägt StartRunningAsync fehl (0 rows affected), der Runner startet Claude aber trotzdem → derselb
ClaudeDo-Task: 44f86be2-7f3d-462e-98b3-eb94c0174eea
- Extract FakeClaudeProcess to Infrastructure/FakeClaudeProcess.cs (was
defined inline in QueueServiceTests #region); all consumers updated
- Replace duplicate FakeHubContext/FakeHubClients/FakeClientProxy
(QueueServiceTests) with existing CapturingHubContext from Infrastructure
across all 7 affected files; Planning's file-local FakeHubContext kept
- Rename SeedListWithAgentTag → SeedListAsync (return Task<string>, drop
unused agentTagId tuple element) and SeedListWithAgentTagAsync → SeedListAsync
- PrimeRunnerTests keeps its private nested FakeClaudeProcess: constructor
API (delay/exitCode/lines/result params) differs from the shared one and
replacement would require rewriting every test in that file
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Collapse TryCompleteParentAsync (planning -> Done) and
TryAdvanceImprovementParentAsync (improvement -> WaitingForReview) into one
TryAdvanceParentAsync that surfaces any WaitingForChildren parent for review
once all children are terminal. Planning parents no longer auto-complete.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
1. ArgumentList (fix injection): ClaudeArgsBuilder.Build() now returns
IReadOnlyList<string>; ClaudeProcess populates ProcessStartInfo.ArgumentList
instead of Arguments, so values like system prompts are never shell-split.
DailyPrepPrompt, RefinePrompt, and WeekReportService migrated similarly.
All IClaudeProcess fakes updated.
2. ContinueAsync exception guard: wrap RunOnceAsync in try/catch matching
the RunAsync pattern so an unexpected exception never leaves the task
stuck in Running status.
3. Planning chain cascade: OnChildFinishedAsync now calls CancelAsync on
the immediate blocked successor when a child fails or is cancelled,
triggering a recursive cascade that clears the entire remaining chain
instead of leaving it wedged.
4. FailAsync guard: restrict valid source states to Running and Queued;
WaitingForReview -> Failed is now rejected, preventing an invalid
transition that could corrupt the review workflow.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
A test that spawns the actual claude binary shouldn't live in the suite —
dotnet test must never invoke Claude. §1.0 step 3 stays a manual check.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Spawns the actual claude binary and asserts exit code 0, a session id,
non-empty result, and output tokens > 0 (plan-verification §1.0 step 3).
Inert unless CLAUDE_AUTHENTICATED=1, since it needs an authenticated CLI.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
If WorktreeAddAsync succeeds but the worktrees-row insert throws, the
worktree was left on disk and branch undeleted with nothing tracking it.
Wrap the insert in try/catch and best-effort remove the worktree+branch
(non-cancellable) before rethrowing.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
BUNDLE — both fixes live in the Worker run-recording / persistence layer (where a TaskRun is written after an agent finishes), NOT in ExternalMcpService.cs. Keep this disjoint from the MCP-surface bundle so the two can run in parallel without worktree conflicts. The DTO fields (tokensIn, tokensOut, resultMarkdown) already exist and are surfaced by list_runs/get_run — the bug is at write time.
1.
ClaudeDo-Task: 49a6060a-5044-4f1b-8665-5cfc064b8a82
Move interface declarations into per-area Interfaces/ subfolders, merge the
small task-list filter classes into StatusFilter/SmartFlagFilter, and simplify
related services, converters and hub DTO handling.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Slice 6 of the worker state and queue consolidation refactor.
* Drop Manual, Planning, Planned, Draft, Waiting from the TaskStatus enum
and from the EF value converter; only the lifecycle values remain
(Idle, Queued, Running, Done, Failed, Cancelled).
* Add migration RetireLegacyTaskStatus that rewrites existing rows:
manual/draft -> idle, planning -> idle+planning_phase=active,
planned -> idle+planning_phase=finalized, waiting -> queued+blocked_by
derived from sort_order via a CTE with LAG().
* Reroute every call site that compared/set legacy values to the new
three-field model (Status + PlanningPhase + BlockedByTaskId), including
the planning repo helpers, MCP services, the planning chain coordinator,
and the UI view-models. TaskRowViewModel now exposes PlanningPhase to
drive the planning badge.
* Refresh Worker/CLAUDE.md and Data/CLAUDE.md, the docs/plan.md status
section, and the planning verification notes in docs/open.md.
Map legacy "bypassPermissions" config to "auto" at dispatch time; pass-through other modes (acceptEdits, plan, default).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Add GitService.CheckoutBranchAsync; compare targetBranch to current HEAD
before MergeNoFfAsync and switch when they differ. Returns Blocked if the
branch does not exist. Add three new tests (two service, one GitService).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
mika kuns